Use a template in order to keep your walk-in coolers up-to-date and in perfect condition to ensure maximum food safety and quality.
See detailsAvoid pitfalls like slippery floors and hypothermia and keep your employees health in mind by ensuring maximum workplace security with our walk-in cooler safety assessment template.
See detailsUsually, a walk-in cooler is used by commercial establishments (like supermarkets, convenience stores, warehouses, and restaurants) to store large amounts of temperature-sensitive goods such as meat products like poultry, beef, pork, and fish, as well as other frozen goods. As the name implies, walk-in freezers and coolers are large enough that humans can freely move inside. Inside it, there is usually an array of racks on which the perishable goods are stacked.
Although larger than regular home refrigerators, walk-in coolers still operate on the same heat exchange process called refrigeration. Refrigeration is the process of continuously transferring heat from a low-energy source to a high-energy source by introducing compression work. The components of a walk-in cooler and home refrigerator are also similar: both have coils, a compressor, refrigerant, and fans. These mechanical components are the focus of the walk-in cooler maintenance checklist.
Requirements regarding walk-in coolers and freezers may vary depending on the regulations set forth by national or local governments. So the following guide includes an amalgamation of walk-in cooler maintenance checklists from various manufacturers and a sample walk-in freezer safety checklist from the Health and Safety Executive (HSE).
Walk-in cooler maintenances are focused on inspecting the mechanical components of a walk-in cooler and freezer. Aside from a visual inspection, this also includes subjecting these mechanical components to various tests to know if they are in good working condition. Below are the main components and a brief summary of its inspection and test procedures.
The condenser and evaporator coils are the components at which the heat exchange process happens between the refrigerant and the ambient air. These coils are made from corrosion-resistant metal pipes that are melded inside an array of cooling fins.
Ambient air is forced to flow into the outside fins where its heat is removed by the refrigerant flowing inside the coils. If these fins happen to be blocked by an accumulation of dirt and debris, then the cooling efficiency of the cooler or freezer is greatly decreased.
This is why manufacturers suggest a regular cleaning of the cooling coils of walk-in coolers and freezers. Aside from regular cleaning, it is also necessary to check for any signs of damages such as bent fins, corroded pipes, and frozen coils.
A compressor is a mechanical component that drives the refrigerant into the coils. And as its name implies, it generates flow by continuously putting the refrigerant into a high-pressure state through compression. When the desired pressure is not reached by the compressor, it greatly lowers the efficiency of the refrigeration cycle.
That is why the generated pressure should be tested by the compressor. This may be easy to do depending on the design but usually, compressors have testing ports for this purpose that are called “service ports”. Aside from refrigerant pressure, other compressor parameters that need to be tested are oil level, voltage, current, temperature, and grounding.
Condenser fans are what drive the air towards the condenser coils to absorb the heat from the refrigerant. A dirty fan reduces the airflow rate which in turn reduces cooling efficiency. And that is why it is recommended to conduct a regular cleaning schedule of the condenser fans as well as test the fan parameters like voltage, current, and fan speed to ensure that it is operating at an optimal condition.
The interior and exterior conditions mostly refer to the visual condition of the walk-in coolers and freezers. You shoulf regularly inspect the interior and exterior for any physical signs of damage. This procedure includes checking the seals and gaskets of the door and wall panels. This is important since these damages can affect the insulating capacity of the cooler.
Also, it is recommended to ensure that the interior is clean and that the drain is not clogged to prevent any water buildup in the cooler. This is to prevent the accumulation of unwanted bacteria and molds.
Temperature sensors are a crucial part of the cooling efficiency and effectiveness of walk-in coolers and freezers. You should calibrate all temperature sensors because they dictate how the refrigeration system will behave.
If the sensor reading is lower than the real temperature, then the refrigeration system will ramp down its cooling despite not meeting the set temperature. This can lead to the spoiling of the products inside the freezer. And if the sensor reads higher, then the refrigeration system will still ramp up despite already meeting the set temperature which leads to inefficient power consumption.
Aside from the inspection and maintenance of the mechanical components, a walk-in cooler maintenance checklist should also include safety requirements that need to be followed by commercial establishments. The sample walk-in freezer safety requirements from the Health and Safety Executive (HSE) give you an idea of what you should pay attention to:
One of the major hazards in walk-in cooler safety is being exposed to the extreme cold by being locked inside the cooling chamber where victims can suffer from physical injuries like hypothermia and frostbite. In worst cases, being locked inside a walk-in freezer can even lead to death.
To prevent this hazard from happening there are various methods that are recommended. You could provide an illuminated emergency exit installed with heaters or set up emergency alarm buttons inside the freezer.
Another major hazard of walk-in freezers is freezers and coolers that utilize Class 2 refrigerants. Class 2 refrigerants are those that exhibit hazardous properties like flammability and toxicity.
One example of this is ammonia. When accidentally released, ammonia can cause severe respiratory issues to workers who have inhaled it. To prevent this from happening it is important to put up proper hazard signages, vapor detectors, and emergency exhaust systems.
Another hazard of working inside a walk-in freezer includes accidents due to slipping. Since walk-in freezers are very cold in nature, any liquid due to spillage might become a slipping hazard and severe injuries such as fractures may follow. You should practice good housekeeping to keep the floors dry and require workers to wear shoes that have good grip.
A walk-in cooler maintenance checklist is a document that contains all the required maintenance procedures for a walk-in cooler or walk-in freezer to ensure that it is operating efficiently. It also contains a list of safety considerations for the operation of walk-in coolers and freezers. By digitizing such a checklist with Lumiform you can perform safety and quality controls and audits much more time efficiently and effectively to keep your systems running and your workers safe.
Perform audits on the go from your smartphone or tablet – be it online or offline and easily create checklists of any kind to collect data in the field or to reduce machine failures and threats to employees.
Max is a Content Writer at Lumiform originally from New York, NY. Before Lumiform, he worked at the fintech company, writing on a range of fintech-related topics. He has experience writing blogs, CRM communication, guides, and landing pages. In addition to a love of content writing, Max is passionate about standup comedy and cooking.
Lumiform offers innovative software to streamline frontline workflows. With over 12,000 ready-to-use templates or custom digital forms, organizations can increase efficiency and automate key business processes. The platform is particularly user-friendly, offering advanced reporting capabilities and powerful logic functions that enable automated solutions for standardized workflows. Discover the transformative potential of Lumiform to optimize your frontline workflows. Learn more about the product
Access a complete set of resources aimed at maximizing safety, quality, and operational excellence, including detailed guides, related templates, and real-world use cases.
See comprehensive collections of best practice templates related to this topic.
Check out how the Lumiform software can be utilized for related use cases.
Everything you need to boost productivity, safety, and quality.
